Loading the interactive wheel tools…

Wheel offset
comparison

Compare nominal wheel-edge positions
from widths and offsets.

Wheel comparison tool

Widths are nominal bead-seat measurements.

Inner clearance loss
+2.7 mm

New nominal inner edge moves toward suspension.

Outward movement
+22.7 mm

New nominal outer edge moves farther outward.

Half-width increase
12.7 mm
Offset change
−10 mm

Nominal edge positions · one shared scale

Nominal bead-seat edges only. Tyres, flange shape, brakes, body and suspension travel are not modeled.

This geometry does not certify fitment.

How it works

1

Enter both wheel sizes

Input the original and new widths and offsets.

2

Compare half-width
and offset

The half-width change and offset change determine inner and outer movement.

3

Read each edge
movement

Read signed movements of both nominal edges from the same mounting face.

Example: 7.5 in ET +45 to 8.5 in ET +35

Inner loss: 12.7 + (−10) = +2.7 mm

Outward:   12.7 − (−10) = +22.7 mm

Questions, Answered.

Does positive inner loss reduce nominal clearance?

Yes. The new nominal inner edge moves farther toward the suspension. Negative inner loss means a nominal clearance gain.

Does positive outward movement mean actual poke?

It only means the nominal outer bead-seat edge moved outward. Tyre size, physical flange shape and vehicle bodywork are not modeled.

Does the diagram include my tyre?

No. Measure actual tyre, brake, body and suspension clearances separately. Geometry alone does not certify fitment.

WHEEL OVERLAY
STUDIO

See the movement before you choose.

Compare wheel positions   →